Use: Offset Printing
Type: CTP Plate, UV CTP plate, also used as high sensitivity PS plate.
Model Number: Aluminum Plate
CTP Plate Name: Offset Printing Positive Voilet Aluminum Plate for CTP
Color: Blue and green
Application: Commercial sheetfed and rotary press printing
Substrate: Electrochemically grained and anodized aluminum
Spectral sensitivity: 350-460nm UV light, especially 400-410nm UV laser
Relative Sensitivity: 40±5 mW(Cron UV-4632CI platesetter Parameter 1000 rpm)
Resolution: 2-98% @ 250 Lpi.
Applicable platesetter: main UV-CTP platesetters such as Cron,luscher,Amsky,basysPrint.
Run length: (unbaked)18 months,and saft light is yellow.
|Plate Type||UV CTP plate, also used as high sensitivity PS plate.|
|Application||Commercial sheetfed and rotary press printing|
|Substrate||Electrochemically grained and anodized aluminum|
|Final image color||Blue-Green|
|Spectral sensitivity||350-460nm UV light, especially 400-410nm UV laser|
|Relative Sensitivity||40±5 mW(Cron UV-4632CI platesetter Parameter 1000 rpm)|
|Resolution||2-98% @ 250 lpi.( The difference between plate-making equipment will be different)|
|Applicable Platesetter||main UV-CTP platesetters such as Cron,luscher,Amsky,basysPrint.|
|Run length||(unbaked)18 months, run length will be different when used in different conditions|
such as printing presses/paper/ink/printing chemicals and etc,.
|Run length||18 months under recommended storage conditions|
|Developer||Colorte PD positive PS plate developer|
|The ratio of developing|
solution (PD: water)
|Washing temperature||Room temperature|
|Replenishing Rate||100—150 ml/m2|
Transportation and Storage
Plates should be kept at a place dry and cool. The shelf life could be up to 12 months with a temperature between 1530°C and RH 2560%. They also should avoid the place where is too close to water tank, chemical reagent or direct sunlight. Plates should be used up as quickly as possible after unpack and they should be put in the original package and take measures to avoid light if they need shortterm storage. Usually, under the yellow light, it can be left for 8 hours, and 2 hours under white or natural light.
Unpack under day light or yellow light, it is suggested that the plate making room avoid natural light. For manual or semi-automatic plate-making equipments, when loading and unloading plates, we should avoid scratch, which may influence plate properties.
1.Inquiry on your needs.
2.Reply and give you suitable solutions.
3.Select nice solutions and make the contract.
4.Receive payment and become to produce.
5.Produce after receive down payment.
6.Testing&packing after production.
7.Receiving balance and do the delivery.
8.Receive the goods.
9.100% QC pass,strictly checking and testing before shipping.
10.2 Years super long warranty.
11.Free Operation Training and Technical Training.
12.Free Providing replacement of accessories.