Model Number: 3003
Application: Construction, decoration
Alloy Or Not: Is Alloy
Grade: 3000 Series
Surface Treatment: Coated
Temper: O - H112
production name: 3003 h24 0.7mm thin aluminum coil strips for decoration
Length: according to your requirements
Surface treated: mill finished
Certification: ISO9001:2008;GJ/B 9001B-2009;ASTMB209
Technical standard: GB/T 3880:2012
Advantage: satisfactory anodizing
Sample: free for charge
MOQ: No MOQ if in stock
Alloy No.: 3003
Classification of Aluminum Sheet/Plate
According to alloy composition is divided into
① High purity aluminum plate (the purity above 99.9%)
② Pure aluminum plate
(ingredients made from pure aluminium rolling)
③ Alloy aluminum plate
(composed of aluminum alloy usually with AL and CU, AL and MN, AL and SI, AL and MG etc)
④ Composite aluminum plate or brazing plate
(a variety of material compound for special purposes )
According to thickness is divided into
① Thin aluminum plate: 0.15-2.00mm;
1000 series Aluminum Sheet Specifications
Chemical and marine equipment
Capacitor ventliation system compents
1100 Aluminum Sheet Low strength aluminum alloy has excellent corrosion resistance and satisfactory anodizing and conversion coating finishing characteristics. It is unmatched by any other commercial aluminum alloy in workability. Readily to welding, brazing, and soldering. Machinability is poor and tends to be "gummy". Non-heat treatable.
As fabricated (no mechanical property limits specified)
Annealed - products achieving the required annealed properties after hot forming processes may be designated as O temper.
Slightly strain-hardened from working at an elevated temperature from a limited amount of cold work (mechanical property limits specified).
Solution heat-treated and naturally aged.
Cooled from an elavated temperature shaping process and then artificially aged.
Solution heat-treated and then artificially aged.
Solution heat-treated, stress-relieved by controlled stretching (permanent set 0.5% to 3% for sheet, 1.5% to 3% for plate, 1% to 3% for rolled or cold finished rod and bar, 1% to 5% for hand or ring forging and rolled ring) and then artificially aged. The products receive no further straightening after stretching.