Model Number: Required
Type: Fin Tube
Application: Heater Parts, Heat Exchanger,Air Cooler,Condenser,Evaporator,Fluid Cooling,etc.
Base Tube Material: stainless steel,carbon steel,copper,alloy steel,etc.
Fin Material: aluminium
Design Temperature: Below 450
Inside Surface Condition: Grooved/Corrugated
Heat Transfer Efficiency: High
Product Processing: Extruded,Embedded,Combined,High Frequency Welding, etc.
Package: Wooden case with steel frame
|Application||Heat Exchanger,Air Cooler,Condenser,Evaporator,Fluid Cooling,etc.|
|Base Tube Material||stainless steel,carbon steel,copper,alloy steel,etc.|
|Fin Material||aluminium,copper Alloy,stainless steel,carbon steel|
|Design Temperature||Below 450℃|
|Inside Surface Condition||Grooved/Corrugated|
|Heat Transfer Efficiency||High|
|Product Processing||Extruded,Embedded,Combined,High Frequency Welding, etc.|
|Package||Wooden case with steel frame|
Big Diameter Titanium Seamless Pipe-the market leader in China, size range from 88.9 to 219.1mm(3 to 8 inch.) outside diameter. More than 70% seamless pipes(OD from 133 to 219.1mm) in China are produced in our plant.
Stainless Steel & Nickel Alloy Tube & Pipe-the leading producer in China, size range from 6 to 609.6mm(1/4 to 24 inch.) out side diameter. Materials includes stainless steel, duplex steel and nickel alloys.
Finned Tube-the leading producer in China, our main products include Extruded, L, LL, KL, G(Embedded) and High Frequency Welded Finned Tubes etc.
Our products are mostly customized, that’s to say, we make the sample according to the 2D/ 3D drawings from you. It will take time and resources of our company, so we will charge you for the sample, once you confirm without questions, we will put it into mass production. And we will give you a discount on the basis of the quantity of your order.
2.Do you have titanium alloy in stock?
Yes, but just the normal specification finned tube. Most of our products are customized.
3.Why does it take at least 4 weeks to finish the mold?
After we get the 2D/ 3D drawings from you, our engineer will analyze the drawings, to see whether it’s feasible. Once there is any questions, we will feedback to you and give our suggestions if necessary. And after you confirm without questions, we will sent to our Mold Department for production.
4.How long will it take for the production?
Once receipt the deposit from you, we will start the following process: Making the mold, Making wax models, Making the shell, Dewaxing, Roasting, Alloy casting, Getting the semi-finished product, polishing , detection and so on. After finish, they need time to check the products, if found any possible defect parts, they will return to the production until every part is 100% approved. Therefore, it will take about 25-35 days to finish the first batch. And it just need 20-30 days to finish the second, third, fourth…… batches.
5.What’s the payment term of your company?
Before shipment by T/T or against copy of B/L.
6.How do you inspect the elements before package?
We always 100% QC before package.